The debugging method of the glass edge grinder is to turn on the switch, check the water circulation system, retreat the grinding wheel to below the grinding position, start the machine to run idle, and adjust the distance between the front and rear guide chain plates to keep consistent with the thickness of the glass. The principle of the glass edge grinder is very simple, that is, the grinding and polishing of the glass is achieved through the grinding head motor and the grinding wheel. How to adjust the specific glass edge grinder and what is the principle of the glass edge grinder
1. How to adjust the glass edge grinder
Glass edge grinders are often used for glass edge grinding. They can not only grind the edges of the glass smoothly, but also perform special treatments, such as grinding bevels, etc. Do you know how to adjust the glass edge grinder?

After completing the safety check before debugging and confirming the results, you can immediately proceed with debugging. The debugging process of the machine is completed in the manual working mode. The debugging steps are as follows:
1. Turn on the main power switch of the equipment and turn on the power key switch of the control circuit.
2. Check the water circulation system, start the water pump, and check whether the water supply is normal and whether the circulation is normal.
3. Move the grinding wheel back below the grinding position, rotate the handles for manual feeding of each grinding wheel, and move the grinding head back to the better back to prevent the glass from colliding with the grinding wheel due to the cutting surface of the grinding wheel being too far forward when the glass is introduced.
4. Start the machine and run it idle. Under normal water conditions, start the grinding head and conveyor belt in sequence.
5. Adjust the distance between the front and rear guide rail chain plate gap to keep consistent with the thickness of the glass.

2. What is the principle of the glass edge grinding machine?
The principle of the glass edge grinding machine is mainly to achieve glass grinding and polishing through the grinding head motor and grinding wheel. Ordinary single-sided/double-sided edge grinding machines can achieve rough grinding, fine grinding, and polishing at one time. Customers can choose different grinding wheels according to their processing requirements.
Conventional single-sided glass edge grinding machines are generally composed of a main machine (base + column + front and rear beams + grinding wheel water tank + motor + electric box, etc.), feed and discharge end guide rails, glass support frame, and floor water tank. Different materials and motors will affect the accuracy and service life of the machine; for example, the base and front and rear beams of an ordinary single-sided edge grinding machine are castings that can be quenched to increase the rigidity of the machine, and their service life is generally 10-15 years.